The Chelsea | Arroll
The intensely decorative Chelsea model revives the 1900s.
With this intricate detailing this radiator will standout in light and dark colours with harmonizing contrast.
The Arroll Cast Iron Chelsea can be delivered fully built and tested up to 18 sections which is about 1200mm long. You may have this radiator in any length but some assembly on site will be required. Also, please bear in mind the weight, often it's best to have the taller and heavier radiators delivered in smaller sections.
Each section is approximatey 65mm wide. The lengths of the radiator stated should only be used as a guide as every radiator is bespoke and hand built to your own specification. There will be tollerences for seal compression and milled faces so please don't use these exact measurments to fix pipes. Please call us for more information or to discuss your project.
Single Section Height | 680mm |
Single Section BTU* | 426 |
Single Section Width | 65mm |
Single Section Depth | 218mm |
*BTU for comparrison DELTA ∆T 60˚C
BTU CALCULATOR & RADIATOR BUILDER
DIMENSIONS
LEG SECTION HEIGHT
680mm
SECTION LENGTH
65mm
MIDDLE SECTION HEIGHT
615mm
SECTION DEPTH
200mm Across Top, 218mm across feet
INLET & EXIT
BOTTOM INLET TO FLOOR
125mm
TOP INLET TO FLOOR
625mm
INLET TO SKIRTING
109mm
HEAT OUTPUT PER SECTION
DELTA ∆T 50˚C
99 Watts / 338 BTUs
DELTA ∆T 60˚C
125 Watts / 426 BTUs
WEIGHT
EMPTY WEIGHT PER LEG SECTION
14 Kgs
EMPTY WEIGHT PER MIDDLE SECTION
15 Kgs
*All measurements and sizes are approximate.