The Neo Georgian 6 Column | Paladin
The Paladin Neo Georgian 6 column cast iron radiators are an elegant yet substantial traditional Arts and Crafts design offering the perfect solution to rooms which have limited wall space but require maximum heat output. The elegantly simple design of these 6 columned radiators offer the option of being perfect for both modern and period homes.
These classic Neo Georgian 6 column cast iron radiators are all 221mm in depth and come in a choice of 3 heights: 505mm, 660mm and 960mm. Available with 1/2" and 3/4" inlet options.
Please read Customisation & Finishes below for information about Primer Radiators
The Neo Georgian 6 column can be delivered fully built and tested up to 19 sections which is about 1200mm long. You may have this radiator in any length but some assembly on site will be required.
Each section is approximately 61mm wide. The lengths of the radiator stated should only be used as a guide as every radiator is bespoke and hand built to your own specification. There will be tolerances for seal compression and milled faces so please don't use these exact measurements to fix pipes. Please call us for more information or to discuss your project.
Radiator Sizes and Output (Per Section)
| Single Section Height | 505mm | 660mm | 960mm |
| Single Section Width | 61mm | 61mm | 61mm |
| Single Section Depth | 252mm | 252mm | 252mm |
| BTU ∆T 50˚C | 329 | 432 | 622 |
| Watts ∆T 50˚C | 96 | 126 | 182 |
Other Heat Outputs
| 505mm | 660mm | 960mm | |
| BTU ∆T 60˚C | 421 | 553 | 796 |
| Watts ∆T 60˚C | 123 | 162 | 233 |
| BTU ∆T 30˚C | 179 | 235 | 338 |
| Watts ∆T 30˚C | 52 | 69 | 99 |
DELTA ∆T 30˚C Best Used for Ground & Air Source Heat Pumps
Primer Finish
A standard radiator is painted with a primer before it is assembled to your specification. If it is ordered in the standard primer finish no other finishing or re-painting is done after assembly. It is expected that the customer will re-prime and paint the radiator themselves.
Each section starts life with a coat of primer, which could be black, grey or a shade of white, but this is not a guaranteed “finish" as the radiator will not be sealed. We strongly recommend that the painting is completed by the manufacturer as they use suitable radiator paint that won't be affected by the heat.
If customers are to choose & paint their own radiators, we do advise seeking advice from a paint professional. The paint finish will not be covered by the manufacturer’s warranty.
All Paladin radiators are primed in black primer before the radiator is assembled.
You can have the radiator like this and you can paint it yourself or alternately, you can let the Paladin experts paint them in a RAL, metallic or colour matched paint. We also offer a range of special finishes including Farrow & Ball, Little Greene, polish, lacquer, antiqued paint and highlighted paint.
Unfortunately, due to its height, the 960mm cannot be polished or lacquered.
For full details and prices please see our Finishes page or give us a call!
