Price Match Guarantee!

On like-for-like products

Arroll Peerless Cast Iron Radiator in White from  Foundry Cast Iron Radiators and Baths

The Peerless | Arroll

Available in three heights the Arroll peerless cast iron radiator is ideal for narrow areas that also need good heat outputs. Its plain design will complement other Arroll radiators such as the princess. It is shown here in a white RAL painted finish and a rustic polished finish.  


The Arroll Peerless can be delivered fully built and tested up to 15 sections which is about 1200mm long. You may have this radiator in any length but some assembly on site will be required.


Each section is approximately 77mm wide. The lengths of the radiator stated should only be used as a guide as every radiator is bespoke and hand-built to your own specification. There will be tolerances for seal compression and milled faces so please don't use these exact measurements to fix pipes. Please call us for more information or to discuss your project.


Single Section Height   450mm   600mm   795mm  
Single Section BTU* 216 293 375
Single Section Width 78mm 78mm 78mm
Single Section Depth 127mm 127mm 127mm


BTU for comparrison DELTA ∆T 60˚C



  • All our radiators are finished using a black primer. The sections are primed before the radiator is assembled. You can have the radiator like this and you can paint it yourself or alternately, if you wish, why not let our experts paint them from one of the thousands of Ral colours or our specialised finishes to give you a classic, modern or contemporary look. Please visit our Finishes section for more ideas.

Number of Sections Required or Radiator Length
Radiator Height