The Pimlico | Paladin
Our Pimlico cast iron radiator is a traditional late Victorian cast iron radiator more widely seen in later Edwardian homes. An elegantly simple design depicting 2 columns yet only 110mm in depth, giving a contemporary feel for the modern room as well as an authentic feel for the period home.
The perfect choice for the traditional quaint cottage or small traditional room as well as a great choice for the modern home where space is at a premium such as the bathroom.
Also a great choice for the electric option as the slim nature of this duchess radiator is useful for areas in the home with space restriction such as attic rooms and conservatories where wet plumbing is probably a costly option. Our Pimlico cast iron radiator is a 2 column cast iron radiator and is available in a range of heights, 460mm, 660mm and 760mm.
Please read below for information about Primer Radiators
The Paladin Pimlico cast iron radiator can be delivered fully built and tested up to 19 sections which is about 1200mm long. You may have this radiator in any length but some assembly on site will be required.
Each section is approximately 61mm wide. The lengths of the radiator stated should only be used as a guide as every radiator is bespoke and hand built to your own specification. There will be tolerances for seal compression and milled faces so please don't use these exact measurements to fix pipes. Please call us for more information or to discuss your project.
Radiator Sizes and Output (Per Section)
| Single Section Height | 460mm | 660mm | 760mm |
| Single Section Width | 61mm | 61mm | 61mm |
| Single Section Depth | 110mm | 110mm | 110mm |
| BTU ∆T 50˚C | 151 | 221 | 254 |
| Watts ∆T 50˚C | 44 | 65 | 74 |
Other Heat Outputs
| 460mm | 660mm | 760mm | |
| BTU ∆T 60˚C | 191 | 280 | 322 |
| Watts ∆T 60˚C | 56 | 82 | 94 |
| BTU ∆T 30˚C | 82 | 120 | 138 |
| Watts ∆T 30˚C | 24 | 35 | 40 |
DELTA ∆T 30˚C Best Used for Ground & Air Source Heat Pumps
HEAT LOSS CALCULATOR & RADIATOR BUILDER
Primer Finish
A standard radiator is painted with a primer before it is assembled to your specification. If it is ordered in the standard primer finish no other finishing or re-painting is done after assembly. It is expected that the customer will re-prime and paint the radiator themselves.
Each section starts life with a coat of primer, which could be black, grey or a shade of white, but this is not a guaranteed “finish" as the radiator will not be sealed. We strongly recommend that the painting is completed by the manufacturer as they use suitable radiator paint that won't be affected by the heat.
If customers are to choose & paint their own radiators, we do advise seeking advice from a paint professional. The paint finish will not be covered by the manufacturer’s warranty.
All Paladin radiators are primed in black primer before the radiator is assembled.
You can have the radiator like this and you can paint it yourself or alternately, you can let the Paladin experts paint them in a RAL, metallic, or colour matched paint. We also offer a range of special finishes including Farrow & Ball, Little Greene, polish, lacquer, antiqued paint and highlighted paint.
For full details and prices please see our Finishes page or give us a call!
