Electric Heating Element for Cast Iron, Steel & Aluminium Radiators | Heatpol

Electric Heating Elements for your cast iron, aluminium, steel radiator and towel rails. This analogue thermostatic element comes with three heat settings and frost protection. These elements can be installed into most radiators and towel rails, for extra control than a standard simple heating element.

Available in Six different wattages.
Finishes available are Black, Anthracite, Gold and White.
Works in water filled column radiators
Adjustable temperatures up to 65°
Voltage Supply 230V
Frost Protection
900mm Wire Ready for hard wiring
Lower Watts come with standard 1/2" Thread
Higher watts Require a non-standard 3/4" Bush
IP Rating; 54

Can be used either as a stand-alone heat source or as part of your central heating as a dual fuel source. Use the table above/below to ensure the correct element for your radiator. Please check BTU or Watts output of the radiator for cast iron and steel radiators. For aluminium please use water content. With the length of element, the length of the radiator should be a minimum of 50mm longer than the element.

It is recommended to use Automatic air vents with your Electric Radiator to allow the build up of air to seep out slowly. For Installation follow manufacturers instructions when filling the radiator, do not overfill

Want something more Hi-Tech, see our digital wi fi elements and home programmer for heat pol elements

For Aluminium radiators please use water content, instead of radiator output.

Water Content (L)	Radiator Output - Watts	Radiator Outputs - BTUs	Heater Length (mm)	Recommended Heater	Coupler Size
1,5 - 3	350W	1194	340	300w	Standard ½”
3 - 4.5	350-550W	1194-1877	390	600w	Standard ½”
4.3 - 7.5	500-850W	1706-2900	440	900w	Standard ½”
5.2 - 8.3	700-1050W	2388-3583	470	1200w	Standard ½”
6.2 – 10	850 – 1300W	2900-4436	520	1500w	Requires ¾” Bush
8.5 - 18	1050-1800W	3583-6142	570	2000w	Requires ¾” Bush