Paladin The Victoriana 4 Column Cast Iron Radiator | Foundry Cast Iron
top of page

Price Match Guarantee!

On like-for-like products

The Victoriana 4 Column | Paladin

The Victoriana 4 Column | Paladin

A timeless cast iron 4 column radiator that compliments both the period and modern home. This classic late Victoriana 4 column cast iron radiator is 143mm deep. The Victoriana 4 column range is available in 460mm, 660mm, 760mm and 813mm Heights. 

 

The Paladin Victoriana 4 column can be delivered fully built and tested up to 19 sections. You may have this radiator at any length but some assembly on site will be required.

 

Please read Customisation & Finishes below for information about Primer Radiators

 

Each section of the 460mm is approximately 60mm wide. 660mm high model is approximately 62mm wide. Each section of the 760mm high model is approximately 61mm wide. Each section of the 813mm high model is approximately 60mm wide. The lengths of the radiator stated should only be used as a guide as every radiator is bespoke and hand-built to your own specification. There will be tolerances for seal compression and milled faces so please don't use these exact measurements to fix pipes. Please call us for more information or to discuss your project.

 

Radiator Sizes and Output (Per Section)

 

Single Section Height  460mm  660mm  760mm  813mm  
Single Section Width60mm62mm61mm60mm
Single Section Depth143mm143mm143mm158mm
BTU ∆T 50˚C    192    277    323    358
Watts ∆T 50˚C     56     81    95    105

 

Other Heat Outputs

 

 460mm  660mm  760mm  813mm  
BTU ∆T 60˚C                     243    351    409    453
Watts ∆T 60˚C     71    103    120    133
BTU ∆T 30˚C      104    150    175    194
Watts ∆T 30˚C     30     44     51     57

 

DELTA ∆T 30˚C Best Used for Ground & Air Source Heat Pumps

 

HEAT LOSS CALCULATOR & RADIATOR BUILDER

 

  • Primer Finish​

    A standard radiator is painted with a primer before it is assembled to your specification. If it is ordered in the standard primer finish no other finishing or re-painting is done after assembly. It is expected that the customer will re-prime and paint the radiator themselves.

    Each section starts life with a coat of primer, which could be black, grey or a shade of white, but this is not a guaranteed “finish" as the radiator will not be sealed.

    We strongly recommend that the painting is completed by the manufacturer as they use suitable radiator paint that won't be affected by the heat. If customers are to choose & paint their own radiators, we do advise seeking advice from a paint professional. The paint finish will not be covered by the manufacturer’s warranty.​

    All Paladin radiators are primed in black primer before the radiator is assembled.

     

    You can have the radiator like this and you can paint it yourself or alternately, you can let the Paladin experts paint them in a RAL, metallic or colour matched paint. We also offer a range of special finishes including Farrow & Ball, Little Greene, polish, lacquer, antiqued paint and highlighted paint.

     

    For full details and prices please see our Finishes page or give us a call!

£25.50Price

Need any extras?

bottom of page